Stepping up to today's safety Challenge!

Lyle Signs leads the industry in quality, lead-time and service. Lyle's 80+ employees are dedicated to getting your signs fabricated accurately and quickly, allowing you to improve safety on the roads.

Sign fabrication requires management of many variables. We stock coiled metal in multiple gauges and an assortment of reflective material to meet your diverse requirements. A special custom fabrication team stands ready to address nonstandard sign needs. Employees are cross-trained in the factory to meet peak demands and provide backup as necessary. Stocking programs are available to address your regular shipment requirements. Attention to these programs is one of the reasons why Lyle Signs has been consistently recognized with the 3M Quality Award.

Safety is everybody's business. Lyle Signs serves on the ASTM Standards Committee and is an active participant in the Northland ATSSA chapter. Our close proximity to 3M allows us to be the test bed for reflective product enhancements. Our sales and support team is seasoned and has an average tenure of over 10 years in the industry. We understand state and local specifications, and handling diverse requirements is a daily routine for us.

Lyle has been shipping regulatory signs nationwide for nearly 100 years.
Our signs can be found on the streets and roads in every state. We are continually striving to improve the manner in which we conduct business with you. Online ordering, web-base catalogs, custom sign design, order tracking, EDI programs and specialized street sign programs are all components that we are enhancing for your use. Talk to us about how we can tailor a specific sign program for your community or company.

Think Safety. Think Lyle Signs!

For further information on our Products, please send an e-mail to us at This email address is being protected from spambots. You need JavaScript enabled to view it. or Contact Us through this web page.

The Beginning

In 1900, The Lyle Culvert Company started making metal culverts at Lyle, Minnesota. A year later, in 1901, the company moved to Minneapolis, MN locating itself at 171 - 27th Avenue, SE, not far from the University of Minnesota.

In 1912, two engineers with the Culvert Company, the Fraser brothers, designed, developed and patented some sign making machines -- hence the birth of Lyle Sign Division of the Lyle Culvert Company. The machines were built on the pantagraph principle with messages carved or routed approximately 1/16" deep in heavy (12 gauge) steel. For the next 21 years, traffic, park, parkway and street name signs were produced by this carved-in-process.

In 1928, the Sign Division was separated from the Culvert Company. Lyle Signs, Incorporated was established as a separate corporation, locating itself at 2720 University Avenue, SE in Minneapolis, MN.

Embossed Signs

In 1933, Lyle Signs, Inc., bought its first embossing press, designed and developed male and female dies to emboss complete sign messages and strengthen borders on 14, 16 and 18 gauge metal, Embossing Pressall in one operation. Carved-in process signs were still produced because of their extreme longevity, but as years passed, costs of labor (carving one letter at a time) made prices prohibitive. There are, however, carved-in process street name signs still in use in many cities, after 40 or 50 years of service, with only minimum refinishing maintenance costs involved.

The demand for embossed message signs gained popularity from 1933 to the start of World War II, at which time the use of metal for sign purposes was restricted by Federal Regulations. During the war years, Lyle Signs used its facilities in the manufacture of defense items, primarily stamping for the aircraft industry. In 1945, Federal Restrictions on the use of metal for sign purposes was lifted and Lyle was back to making traffic and street name signs.

Lyle Expansion

Blooming, MN PlantDeSmet, SD Ground Breaking CeremonyLyle expanded its plant at 2720 University Avenue, SE three times from 1928 to 1964. The need for a more modern and efficient plant under one roof was imminent. In 1964, a new plant was built in Bloomington, MN.

In the ensuing ten years, cost of manufacture grew and precipitated the 1974 decision to move the complete manufacturing operation to De Smet, SD. Headquarter functions remained in the Minneapolis, MN area.

Reflective Signs

The first reflective traffic control signs were of the reflector button type where holes were punched in the legend and/or border of the signs and reflector buttons were inserted into the holes. Reflector buttons were either front entry type, held in place by spring and washer attachments; or rear entry type, designed with prong type springs on the back. Partial or full housings (covering the reflectorized portion of the sign) were attached to the back of the sign by tamper proof bolts and nuts.

The use of reflective sheeting and reflective beads for background and/or message reflectorization started around 1939 and gained considerable popularity in the years after World War II (1945 and thereafter). Reflective beads were used long before that, but never in Lyle's plant because the type of binder and beads available at that time did not hold up for any length of time.

Reflective Sheeting manufactured by 3M Company and offered for sale in 1939 was (and still is) called Scotchlite. Lyle was the first sign company working with 3M Company in the use and sale of Scotchlite reflectorized signs.

In 1958, Lyle added the manufacture of interstate type signs and is currently considered one of the leading manufacturers of these larger type signs. Starting with its first contract covering signs erected in Michigan, Lyle has expanded its activity in Interstate Signing to include most of the 50 states in the US. Types of materials and construction vary from state to state.

Today

Today, Lyle Signs manufactures and produces a wide variety of signs for a variety of customers. Lyle's state-of-the-art 90,000 square foot facility has been designed to manufacture high quality signage with very short lead times. We believe we establish the industry standards for quality, lead time and service.

For further information on our Products, please email us at This email address is being protected from spambots. You need JavaScript enabled to view it. or Contact Us using this web page.

Search Our Site

Search Catalog